Controls; Display Symbols; Button Functions - VOLTCRAFT VBM-100 Notice D'emploi

Controls

(see fold-out page)
1 Sensor plug connection (12)
2 Display
3 HOLD/ESC button
4 "POWER" switch to turn the device on/off
5 FUNCTION/SEND button
6 UNIT/LOGGER button
7 REC/ENTER button
8 Tripod socket
9 RS-232 interface
10 Tilt stand
11 Battery compartment
12 Sensor plug
13 Sensor
14 Screw-on magnet

Display symbols

REC Memory mode symbol
Max Maximum value display
Min Minimum value display
Peak Current peak value
Max HOLD The max peak value is measured constantly and recorded
H Data hold, display is locked
RMS Average value display
VEL Velocity display
DISPp-p Max displacement display
ACC Acceleration display
Battery replacement symbol

Button functions

POWER Power switch; to switch the device on or off
HOLD Data hold in normal mode, "forward" in logger mode
ESC Exits the setup menu
REC Starts recording
ENTER Confirmation button used in setup menu
FUNCTION Max hold function in normal mode, "backward" in logger mode
SEND Starts data transfer (RS-232 interface)
UNIT Switches between measuring functions and units
LOGGER Starts recording in logger mode
21