Attaching And Detaching Accessories; Carrying Strap - DS Produkte VC-S1001 Mode D'emploi

Masquer les pouces Voir aussi pour VC-S1001:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Floor nozzle: The fl at fl oor nozzle is suitable for both carpets and hard fl oors. Thanks
to the fl at design, even inaccessible places such as under the sofa, under radiators,
etc. can be reached.
Crevice and brush nozzle (14): The crevice nozzle is suitable for cleaning all nooks
and crannies that cannot be reached with the other nozzles (e. g. between up-
holstery). It has a fold-out brush attachment for cleaning sensitive items such as
keyboards.
Upholstery nozzle (15): Use the upholstery nozzle for cleaning all uneven objects,
furniture, lamps, profi les and skirting boards, window ledges, etc.
Suction hose (17): The suction hose is attached to the device and the nozzle. The
suction hose can be used to clean places which are diffi cult to reach. It is particularly
suitable for places which are up on high or cleaning the inside of cars.
Carrying strap (16): By securing the carrying strap which is also supplied to the
device, the device can be hung around the shoulders to make it easier to handle. We
recommend this particularly when using the suction hose.

Attaching and Detaching Accessories

PLEASE NOTE!
Before you attach or detach any accessories, ensure that the device is not connected
to the mains power.
Nozzles and Suction Hose

Carrying Strap

19
Attaching the nozzles: The nozzles are inserted up to
the limit stop into the suction opening (6) on the dust
container (8).
Connecting the suction hose (17): Insert the matching end
piece of the suction hose into the suction opening. The
nozzle you require is plugged into the other end piece.
Connecting the nozzles or the suction hose: To detach the
nozzles or the suction hose, pull them out of the suction
opening.
The end pieces are not identical. Do not attempt
to forcibly push an end piece into the device. If it
cannot be attached easily, try the other end piece.
To use the carrying strap (16), attach the two hooks to the
eyelets on the motor housing. The strap length can be
adjusted by sliding the buckle on the strap.
Detaching the carrying strap: Press the levers on the
hooks to open them and pull the hooks out of the eyelets.
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

07267

Table des Matières