Adjusting The Sound Characteristics (Bas/Tre/Bal/Fad/Sub); Adjusting The Balance; Quickly Attenuating The Sound - Sony XAV-7W Mode D'emploi

SOUND
Tip
When no button is operated for about 3
seconds, the regular display appears
again.
Tip
When the interface cable of a car
telephone is connected to the ATT lead,
the unit decreases the volume
automatically when a telephone call
comes in (Telephone ATT function).
Adjusting the sound characteristics
(BAS/TRE/BAL/FAD/SUB)
In addition to the functions described in the preceding
sections, this unit allows adjusting the following items.
BAS (Bass): Bass level
B/b
TRE (Treble): Treble level
BAL (Balance): Left/right speaker balance (output in opposite
channel is attenuated)
FAD (Fader): Front/rear speaker balance (output in opposite
channel is attenuated)
SUB (Subwoofer): Subwoofer output level
ATT
The adjustment procedure is the same for every item. The
example below is for adjusting the balance.

Adjusting the balance

1
Select the source (CD, MD, radio, etc.).
2
Press SOUND and select "BAL".
3
Within 3 seconds, press B or b to make the
adjustment.

Quickly attenuating the sound

Press the ATT button.
"ATT on" is shown, and the volume is attenuated.
••
While attenuation is on, an icon is shown at the bottom of
the monitor screen, or the indication "ATT" is shown on
the display window.
To restore the original volume, press ATT again or press
VOL +. "ATT
••
Source Sound Memory
This unit automatically memorizes the DSO and equalizer
settings separately for each source (FM, MW, LW, CD, MD/
MS, VIDEO). This feature is called Source Sound Memory.
It lets you listen to each source with optimized settings.
B A L
L R
off" is shown, and the volume is restored.
37