Periodic Inspection; Product Disposal; Specifications - DeVilbiss Healthcare Nonin XPOD DV5M-697 Guide D'instructions

PEriOdic iNsPEctiON

The XPOD oximeter and sensor should be inspected before and after each use. Inspect sensor wires and cables for breaks in the insulation or visible damage. Replace any
sensors or cables that have visible damage. Follow the cleaning instructions for the various components of the oximeter system.
clEaNiNG thE PulsE OximEtEr
Clean the XPOD oximeter separately from the sensor. For instructions on cleaning pulse oximeter sensor, refer to the respective pulse oximeter sensor package insert(s).
CAUTION- To prevent product damage, do not submerse device in either water or any other fluid and do not use caustic or abrasive cleaning agents.
Clean the oximeter components with a soft cloth dampened with isopropyl alcohol. Do not pour or spray any liquids onto the XPOD oximeter and do not allow any liquid to
enter any openings in the device. Allow the oximeter components to dry thoroughly before reusing.

PrOduct disPOsal

The outer packaging is made of environmentally friendly materials that can be used as secondary raw materials. If you no longer need this packaging, bring it to your local
recycling and waste disposal facility according to the applicable regulations.
The equipment, including accessories and internal components, does not belong in your regular household waste; such equipment is manufactured from high-grade materials
and can be recycled and reused.
The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) requires that electrical and electronic equipment be collected and disposed of
separately from other unsorted municipal waste, with the aim of recycling it. The crossed out waste bin symbol indicates that separate collection is required.

sPEcificatiONs

Oxygen Saturation Range (SpO ) ................................................................................................................................................................................................................. 0 to 100%
2
Pulse Rate Range ............................................................................................................................................................................................................ 18 to 300 Pulses Per Minute
Measurement Wavelengths .......................................................................................................................................................................... Red - 660 Nanometers @ 3 mW nominal
Accuracy
1
S pO (70-100%) (±1 SD ):
2
2
No Motion ................................................................................................................................................................................................................................................±2 digits
Motion ......................................................................................................................................................................................................................................................±2 digits
Low Perfusion ..........................................................................................................................................................................................................................................±2 digits
P ulse Rate:
N o Motion (18 - 300 BPM).......................................................................................................................................................................................................................±3 digits
M otion (40 - 240 BPM) ............................................................................................................................................................................................................................±5 digits
L ow Perfusion (40 - 240 BPM) ................................................................................................................................................................................................................±3 digits
SpO and Pulse Rate display update rate ............................................................................................................................................................................................................. 1 Hz
2
Operating Temperature Range .................................................................................................................................................................................... 32°F to +104°F (0°C to +40°C)
Storage & Transportation Temperature Range .........................................................................................................................................................-4°F to +122°F (-20°C to +50°C)
Operating Humidity Range ..................................................................................................................................................................................................10 to 90% non-condensing
Storage & Transportation Humidity Range ..........................................................................................................................................................................10 to 95% non-condensing
Power Draw ...........................................................................................................................................................................................................................60 mW - typical operation
Dimensions .............................................................................................................................................................................................................2.1" x 0.8" x 0.6" (53 x 20 x 15mm)
Weight ........................................................................................................................................................................................... 0.165 lbs. (75g) (including 6' cable and connector)
Sensors ................................................................................................................................................................................................................Designed to use Nonin sensors only
Equipment classification with respect to protection from electric shock ............................................................................................................................................................Class II
Degree of protection from electric shock .....................................................................................................................................................................................Type BF Applied Part
Warranty .............................................................................................................................................................................................................................................. One-year limited
All accuracy specifications are results determined by induced Hypoxia studies on healthy adult volunteers using the 8000AA Finger Clip Sensor.
1
Standard Deviation (SD) is a statistical measure: up to 32% of the readings may fall outside these limits.
2
* Refer to A-DV5M-1 or A-DV5M-2 SmartLink Module instruction guide for the Guidance and Manufacturer's Declaration.
EN - 4
Infrared - 910 Nanometers @ 3 mW nominal
A-M697