Audio Setting; Playing Back Cds; Track Information (Id3); Inserting/Removing A Disc - Medion P66024 Notice D'utilisation

16.3.1. Search settings
Under SUCHLAUF EINSTELLUNG confirm the following prompt NUR STARKE
SENDER? by pressing
JA for the radio to search only for stations with a strong signal;
•
NEIN for the radio to also search for stations with a weak signal.
•

16.3.2. Audio setting

Under AUDIO EINSTELLUNG, confirm the following prompt NUR MONO
ANHÖREN? by pressing
JA to play radio stations in mono. Use this setting when there is weak reception.
•
NEIN to play radio stations in stereo.
•

17. Playing back CDs

 Press the
button or press

17.1. Track information (ID3)

If the CD contains tracks with ID3 information, press INFO while a track is play-
ing to display this information about the tracks one after the other. You will see the
track, artist and album name on the display.

17.2. Inserting/removing a disc

Ensure there is approximately 15 cm of space in front of the device so that the CD
can be ejected easily.
 Press the
button on the device or on the remote control to open the CD tray.
OPEN will appear on the display.
 Always place the CD in the disc tray with the labelled side facing upwards.
 Press
on the device again to close the CD tray. LADEVORGANG will appear
on the display.
The total number of tracks on the CD and the total running time are displayed. The
first track then starts playing automatically.
If no disc is inserted, or if the disc cannot be read, the display reads KEINE CD.
 Press the
button to eject the CD again. OPEN will appear on the display.

17.3. Starting/pausing playback

 Use the SELECT/
start playing tracks. To pause playback, press the button again. Press the button
again to resume playback.
and use the dial (7) to select CD.
button on the remote control or on the device to
303
DE
FR
NL
ES
IT
EN