Technical Data; Declaration Of Conformity - GO2 Rangierhilfe RH 1 Mode D'emploi Et Instructions De Montage

Technical data

Designation
RH 1 manoeuvring assistant
Deployment range
Single-axle caravans with a gross weight of up to 1800 kg
Operating voltage
12 V DC
Power consumption
Approx. 20 A on average
Maximum 120 A
Quiescent current consumption
< 20 mA
Remote control frequency
Class 1, 868 MHz
Speed
Approx. 16 cm per second (depending on weight and slope)
Weight
Approx. 34 kg
(including cross actuation device)
Subject to technical changes.
GO manufacturer's warranty declaration
2
1. Warranty claims
The Manufacturer hereby warrants for all defects of the unit
caused by material or production faults. In addition, the seller
continues to be subject to any statutory warranty claims.
No warranty claim shall be applicable under the following
circumstances:
– Consumable parts which are subject to wear and tear
– As a result of using components in the units that are not
original GO parts
2
– Failure to observe the manufacturer's installation or oper-
ating instructions
– Improper handling
– Improper transport packing
2. Scope of warranty
The warranty covers all defects under clause 1 that occur within
24 months upon concluding the purchase agreement between
the seller and the end customer. The Manufacturer undertakes to
remedy such defects through subsequent fulfilment, i.e. at its dis-
cretion either by repairing or replacing the defective item. If the
Manufacturer remedies a defect under its warranty commitment,
the term of the Warranty shall not recommence anew with regard
to the repaired or replaced parts; rather, the original warranty
period shall continue to be applicable. No further-reaching claims
shall be permitted, especially damage claims presented by pur-
chasers or third parties. This provision shall not affect the validity
of the German Product Liability Act (Produkthaftungsgesetz).
Additional costs arising from complicated removal or instal-
lation jobs on the unit (e.g. dismantling of furnishings or parts
of the vehicle body) are not covered by the Warranty.
In the case of the rollers, we provide a 24 month warranty for
manufacturing defects. It is essential to remove any sharp
stones from the tyres before using the manoeuvring assistant.
3. Making a claim under the warranty
In order to make a claim under the warranty, please contact
the department from which you purchased the product. Please
keep your original proof of purchase to hand for this purpose.
16
RH 1 Manoeuvring Assistant

Declaration of conformity

1. Information about the manufacturer
Name: Truma Gerätetechnik GmbH & Co. KG
Address: Wernher-von-Braun-Str. 12, D-85640 Putzbrunn
2. Appliance identification
Type / model:
GO2® / RH 1 manoeuvring assistant
3. Complies with the requirements of the following
EC directives
3.1 R&TTE Directive (1999/5/EC)
3.2 EMC Directive (2004/108/EC)
3.3 Radio interference suppression in vehicles 72/245/EEC
(with supplements)
3.4 Low Voltage Directive 2006/95/EC
3.5 End-of-life vehicle directive (2000/53/EC)
and bears the type approval numbers e1 03 4473 and the
CE mark.
GO2® RH 1:
Class 1, frequency 868 MHz.
Countries:
AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU,
IE, IS, IT, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.
4. Basis for the proof of conformity
EN300220-2:2006, EN300220-1:2006 (R&TTE art. 3.2),
EN301489-1:2005, EN301489-3:2002 (EMC art. 3.1b),
EN61000-4-2:2001, EN61000-4-3:2006, EN61000-4-6:2001,
EN55022:2003 (Class B), ISO 7637-2:2004, EN60950:2001,
2004/104/EC, 2005/83/EC, 2006/28/EC, 2000/53/EC
5. Monitoring body
Federal Motor Transport Authority (Kraftfahrt-Bundesamt)
6. Signatory details
Signature: p.p. Axel Schulz
Product Centre Manager Putzbrunn, 13.05.2013