Unpacking; Assembly; Before Commissioning - Parkside Pbv 4200 A1 Instructions De Fonctionnement Et De Sécurité

Noise and vibration
The noise levels have been determined in accordance with EN
ISO 3744. Total vibration emission values (vector sum of three
directions) determined per EN 500-1.
Noise can have serious effects on your health. If the machine
noise exceeds 85 dB, please wear suitable hearing protec-
tion.
Noise data:
Sound pressure level L right ......................................... 81.7 dB
pA
Sound pressure level L left ........................................... 81.0 dB
pA
Uncertainty K ................................................................. 2.0 dB
pA
Sound power level L .................................................94.74 dB
WA
Uncertainty K ................................................................ 2.0 dB
WA
Vibration parameters:
Vibration A left .......................................................... 35.4 m/s
hv
Vibration A right ........................................................ 35.6 m/s
hv
Measurement uncertainty K .......................................1.5 m/s
PA
The specified sound levels have been measured in accord-
ance with a standardised test procedure and can be used to
compare different tools with one another.
In addition, these values are suitable for estimating the stresses
for the user resulting from the noise in advance.
m Warning! Depending on how you use the tool, the actual
values may differ from the those given. Implement measures to
protect against noise nuisance.
In doing so, take into account the complete working process,
including the times when the tool is working without load or
switched off.
Suitable measures include regular maintenance and care of
the tool and the insertion tools, regular breaks as well as prop-
er planning of the working process.

8. Unpacking

• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the packaging
and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport dam-
age. In the event of complaints the carrier must be informed
immediately. Later claims will not be recognised.
• If possible, keep the packaging until the expiry of the war-
ranty period.
• Familiarise yourself with the product by means of the oper-
ating instructions before using for the first time.
• With accessories as well as wearing parts and replacement
parts use only original parts. Replacement parts can be ob-
tained from your dealer.
• When ordering please provide our article number as well
as type and year of manufacture for your equipment.
8 GB/IE/NI/CY/MT
m DANGER
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking
or suffocating!

9. Assembly

You will need the following to assemble the petrol scarifier:
• Open-ended spanner size 13 (not included in scope of de-
livery)
• Enclosed accessories bag
9.1 Fitting the push bar (Fig. 3 + 4)
1. First fit the bottom push bar (4) by pushing the M8 x
30mm flange head screws (18) into the intended holes
(inner). Then fit the push bar from outside using the M8
locknuts (19) and tighten them with a size 13 open-end-
2
2 ed spanner.
2. Connect the upper push bar (1) to the lower push bar
2
(4). To do so, use two star grip nuts (3) and washers (3b)
with the respective M8 x 45mm screws (3a).
3. Tighten the star grip nuts (3) on both sides.
4. Attach the cable clip (5) to the left side of the bottom
push bar (4).
5. Fix the cable of the safety switch bar (2) to the cable clip
(5) on the push bar (4) and lock the cable clip (5).
9.2 Hooking in the catch basket (Fig. 5)
1. Lift the discharge flap (13) with one hand on the handle
and hang the catch basket (16) on the handle with the
other hand.
Attention! The engine must be switched off and the
2.
cutting roller must not rotate when attaching the catch
basket!

10. Before commissioning

m ATTENTION!
Always make sure the device is fully assembled
before commissioning!
m WARNING!
Risk to health!
Inhalation of petrol/lubricating oil vapours and exhaust gas-
es can cause serious damage to health, unconsciousness and
in extreme cases death.
- Do not breathe petrol/lubricating oil vapours and exhaust
gases.
- Only use the product outdoors.
NOTE!
Product damage
Using the product without or with too little engine and gear oil
can result in engine damage.
- Fill with petrol and oil before commissioning. The product is
supplied without engine and gear oil.