Technical Features - Eurosystems La Zappa Mode D'emploi

I
CULTIVATOR USE
After adjusting the drawbar (46) to a suitable position, according to the ground characteristics, start the machine using the starting operation guide, press
handlebars downwards to reach the suitable working depth level. Adjust pressure on the handlebars according to the requested depth level.
I
MAINTENANCE
Gear-box: check oil level through the cap (59).Change or top up oil every 60 working hours (API GL-4, SAE 80W, AGIP BLASIA 77, AGIP F1 ROTRA
80W, ESSO GEAR OIL GX 80W).
I

TECHNICAL FEATURES

Transmission : from motor pulley to worm screw by belt; worm-screw-helical gear (in oil-bath) for transmission to drive shaft. Cultivator: with hoes,
working width 36cm., complete with safety case Max tiller speed: 120 RPM. Safety device: all cultivators are equipped with a safety device which
disengages the transmission automatically when the corresponding control lever is released.
6