Technical Data; Installation - ZANKER KOB20601XB Notice D'utilisation

Problem
The appliance does not heat up.
The oven lamp does not operate.
Steam and condensation settle on
the food and in the appliance.
If you cannot find a solution to the problem yourself,
contact your dealer or the service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Technical data

Voltage
Frequency

Installation

Building In
Warning! Refer to the Safety chapters.
Possible cause
The fuse in the fuse box is re-
leased.
The oven lamp is defective.
You left the dish in the appliance
for too long.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
the appliance cavity.
230 V
50 Hz
50
Remedy
Do a check of the fuse. If the fuse
is released more than one time,
contact a qualified electrician.
Replace the oven lamp.
Do not let the dishes stay in the
appliance for more than 15-20 mi-
nutes after the cooking ends.
.........................................
.........................................
.........................................
A
B
29