ZANKER KOB20601XB Notice D'utilisation page 27

Masquer les pouces Voir aussi pour KOB20601XB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• If you have nonstick accessories, do not clean them
using an aggressive agents, sharp edged objects or
dishwasher. It can destroy nonstick coating!
Stainless steel or aluminium appliances:
Clean the oven door with a wet sponge only. Dry
it with a soft cloth.
Do not use steel wool, acids or abrasive materials as
they can damage the oven surface. Clean the oven
control panel with the same precautions
Cleaning the door gasket
• Regularly do a check of the door gasket. The door
gasket is around the frame of the oven cavity. Do
not use the appliance if the door gasket is dam-
aged. Contact the Service Centre.
• To clean the door gasket refer to the general infor-
mation about the cleaning.
Oven ceiling
You can remove the grill to clean the oven ceiling
more easily.
Warning! Deactivate the appliance before you
remove the grill. Make sure that the appliance is
cold. There is a risk of burns.
1.
Remove the screw which holds the grill. For the
first time, use a screwdriver.
2.
Carefully pull the grill down.
3.
Clean the oven ceiling with a soft cloth with warm
water and a cleaning agent, and let it dry.
4.
Install the grill in the opposite sequence.
Warning! Make sure that the grill is correctly
installed and that it does not fall down.
Oven lamp
Warning! Be careful when you change the oven
lamp. Always switch off the appliance before you
start to replace the lamp. There is a risk of electric
shock.
Warning! Bulb lamps used in this appliance are
special lamps for use only in household
appliances. Do not use them to illuminate household
rooms or parts of rooms. If you need to replace a
lamp, the replacement lamp must have the same
power and be for use only in household appliances.
Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses in the fuse box or deactivate the
circuit breaker.
• Put a cloth on the bottom of the oven. This prevents
from damage to the oven light and glass cover.
Replacing the oven lamp:
1.
Find the lamp glass cover at the back of the cavi-
ty.
Turn the lamp glass cover counterclockwise to
remove it.
2.
Clean the glass cover.
3.
Replace the oven lamp with an applicable 300 °C
heat-resistant oven lamp.
Use only the same oven lamp type as the re-
placement lamp. It must have the same power
and be for use only in household appliances.
4.
Install the glass cover.
Cleaning the oven door
The oven door has two panels of glass. You can re-
move the oven door and the internal panel of glass to
clean it.
The oven door can close if you try to remove the
internal panel of glass before you remove the
oven door.
27

Publicité

Table des Matières
loading

Table des Matières