Medela Pump In Style Pro+ Mode D'emploi page 5

CLEANING
How to take apart
After each use
Disassemble the individual parts (breast shield, connector, membrane
and breast milk bottle) as follows:
1
3
1. Remove the breast shield from the connector.
2. Open the back cap of the connector by squeezing both flaps and
swiveling the cap upwards.
3. Remove the membrane from the connector body.
4. Separate the breast milk bottles and lids.
How to wash (before first use and after each use)
Washing is important for hygiene and serves to clean the surfaces of
the parts by physically removing contamination. Wash the parts either
by hand or in a dishwasher. For additional cleaning guidelines see the
Center for Disease Control website: https://www.cdc.gov/hygiene/
about/about-breast-pump-hygiene.html
Do not place the parts directly in the kitchen sink for rinsing and
washing. Use a dedicated wash basin for infant feeding items.
2
1. Rinse the disassembled parts,
except for the tubing, with cold,
clear drinking-quality water.
2. Soak with warm soapy water for
5 minutes and wash with a
clean, unused dish cloth. Use a
commercially available dish
soap, preferably without
artificial fragrances and
coloring (pH neutral).
3. Rinse the parts with cold, clear
drinking-quality water.
4. Store dry parts when not in use.
Do NOT store wet or damp
parts.
Cleaning the breast pump (as needed)
Washing in a
dedicated basin
or
1. Place the disassembled parts,
2. Store dry parts when not in use.
Useful
information
• If using the dishwasher, parts
may become discolored. This
will not impact the function of
the parts.
1. Turn the breast pump off.
2. Unplug the breast pump from the
power source.
3. Wipe the breast pump with a clean,
damp cloth and dry with a clean
towel.
Wash in
dishwasher
except for the tubing, on the top
rack or in the cutlery section.
Use a commercially available
dishwashing detergent.
Do NOT store wet or damp
parts.
5