Technical Information; Assembly; Setting-Up And Adjustment - Scheppach wox d 700sl Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Technical information

700 sl
Construction measurements:
Total length
mm
Total width
mm
Total height
mm
Rocker support
mm
Saw blade Ø
max. mm
Idle - Motor
1/min.
Cutting speed- Saw blade m/sec.
Weight
Power unit:
Motor
V
Input power P1
KW
Output power P2
KW
Motor speed
1/min.
Operating mode
Rated current
A
Work information
Cutting height
Spar
max. mm
Turning cut
max. mm
Piece of wood
max. mm
Specific noise values
The according to the EN 23746 for the sound pressure level resp. EN 31202 (correction factor k3 after supplement A.2
from EN 31204 calculated) for the sound pressure level on the working site ascertained noise emission value amounts
under the foundations of ISO 7904 supplement A performed working conditions to:
Sound pressure level in dB
Idle LWA / Processing LWA
Sound pressure level on working site in dB
Idle LpAeq / Processing LpAeq
The specified values are emission values and therefore should not at the same time be reliable working site values.
Although there is a correlation between emission and immision levels, it cannot unfailingly be derived if extra precauti-
ons need to be taken or not. Factors, which influence the actual availabe immusion value on working site, include the
peculiarities of working area, other sources of noise, e.g. the number of machines and other adjoining processes. The
allowed working values could vary from country to country. However, the information should qualify the user, to be able
to make an estimation of the dangers and risks.
m

Assembly

The machine is delivered, except for the handle bar, completely assembled and is therefore immediately ready to
operate.
Demount the handle bar from the rocker joint and insert it into the left frame side wall.

Setting-up and adjustment

Please pay attention that your rocker circular saw is set up stable and on a leveled floor.
d 700 sl
1270
730
1130
655/785
700
1400
51
kg
108/124
380-420 / 50Hz
5,2
4,0
1400
S6/40%
9,3
240
250
380x240
85 / 92
wox
wox
b 700 sl
1270
730
1130
655/785
700
2600
51
144
petrol
7,1
240
250
380x240
380x240
95 / 102
wox
z
1270
730
1130
655/785
700
126
240
250
Seite:35

Publicité

Chapitres

Table des Matières
loading

Table des Matières