wox d700sl / wox b 700sl
The wox d700sl / wox b 700 sl offers you maximum safety, thanks to its enclosed sawing area.
Commissioning:
Cut off the cable ties on the tension springs. Open the protective cover (1) and connect the tension springs as in the
image.
Procedure with protective cage:
- Open the protective cover (1).
- Insert timber (2).
- Close the protective cover (1).
- Always secure the timber (2) using the handle (3).
- Push the rocker (4) towards the saw blade and cut the material.
- WPull the rocker (4) back and open the protective cover.
- Remove the cut material
- Add timber and close the protective cover again
1
Seite:34