Connecting To A Video Screen - ACteon Sopro 717 First Manuel D'utilisation

Masquer les pouces Voir aussi pour Sopro 717 First:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
E N G L I S H
6

CONNECTING TO A VIDEO SCREEN

6.1. CONNECTION OF DOCK M_USB2
• Connect the video cable (preferably Y/C "S-video") between the connection box and the monitor video input.
• Connect the connecting cable between the connection box and the handpiece.
• If you prefer using a footswitch rather than SoproTouch to freeze the image, you just have to connect the
footswitch (optional) to the connection box. With this configuration, SoproTouch is inhibited.
• Connect the power supply to the outlet, and then to the connection box (the green indicator light should be on).
• Only use the power supply provided with the connection box.
6.2. CONNECTION OF DOCK MU_USB2
• Please refer to DOCK MU_USB2 integration manual for its connections.
• Connect the connecting cable to the handpiece.
• Connect the video cable (preferably Y/C "S-video") between the connection box and the monitor video input.
6.3. OPERATION OF SOPROTOUCH IMAGE FREEZE ON SOPRO 717 FIRST
• When powering on, the camera automatically selects the single-image mode.
• To switch to four-image mode, press SoproTouch
for more than three seconds (until a black flash appears
on the screen or, if you have chosen to use a footswitch, press it for more than three seconds).
• Perform the same procedure to switch back to single-image mode.
• In single-image mode, you just have to slightly touch SoproTouch
(or briefly press the footswitch once) as
soon as the desired image appears on the monitor. The image is automatically stored in the camera and displayed
on the screen. If you want to return to direct mode, you just have to slightly touch SoproTouch
once more (or
press the footswitch).
• Another little gentle touch on SoproTouch
(or press on the footswitch) will freeze another image by deleting
the previous one.
• In four-image mode, the image is stored in one of the quarters of the screen when you slightly touch SoproTouch
(or press the footswitch) and remains displayed on the screen. Another little slight touch on SoproTouch
(or press of the footswitch) will return the image to direct mode. A third little slight touch (or pressof the footswitch)
will store a second image in another quarter of the screen and so on until four images are obtained.
11
2 0 1 0 - 0 3 - 2 6 • U s e r ' s m a n u a l • S o p r o 7 1 7 F i r s t

Publicité

Table des Matières
loading

Table des Matières