Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TOOLS NEEDED FOR INSTALLATION
Before starting the installation of your pool, make sure you have all the necessary tools listed below. Check the
contents of each of the boxes containing the parts of the pool and make sure everything is there before starting your
installation. All parts included in the boxes are important and should all be installed. If parts are left out from the
installation, this could cause serious failure of the pool structure. Once the installation of a swimming pool is started,
it should be completed as soon as possible. If a part is missing or defective, please contact your "CARVIN" retailer were
your purchase was made.
Tools
- Shovel
- Water hose
- Hammer
- Rubber mallet
- Soil Compactor (manual or mechanic)
- Linear level
- Duct tape 2"
- Pliers
- Vacuum cleaner
- Gardening rake
- Measuring tape
- Nails or rods 8" (number of uprights +1)
- Drill, ratchet or adjustable wrench
- Screwdriver bit #3 Phillips or Robertson
- Hexagonal socket 7/16"
- Wheelbarrow
- Punch 3/16" diameter
- Stepladder
- Vinyl covered hook, rope and tent pegs
Or
- Wall stabilizing hooks (number of uprights)
Pool size (FT)
Pool radius
Founda�on radius
Sand required (in tons)*
*The material required for the foundation should be the nest rock dust possible and can be mixed with sand.
Required material
-- Sand (see below quantities)
- Patio slab (equal to the # of uprights)
- Prefabricated cove sections (option)
- Under liner pool carpet
- Plywood sheet ½", (2x) 3'x3'
- Cardboard 16" x 9"
- Wooden plank 2"x4" of length equal to the radius of
the pool
- "CARVIN" pool parts
Informa�ons required for swimming pool installa�on
12'
15'
18'
6'
7'6''
9'
7'
8'6''
10'
1,5
2
3
21'
24'
27'
10'6''
12'
13'6''
11'6''
13'
14'6''
3,5
4,5
5
30'
33'
15'
16'6''
16'
17'6''
6
7
40.
Publicité
Table des Matières
