Manufacturer's Liability And Guarantee; Guarantee Terms - Legrand Keor Dk Rack Manuel D'installation Et D'entretien

ADDITIONAL DISTRIBUTION BOX 3 113 74
The manual must be kept in a safe, dry place and must always be available for its entire lifetime. It is
recommended to make a copy of it and file it away. In case of need (for example in case of damage that
even partially compromises its consultation) the skilled technician is required to get a new copy from the
Manufacturer.
If information is exchanged with the Manufacturer or the authorized assistance personnel, it is essential
to refer to the equipment's rating plate data and serial number.

1.2 Manufacturer's liability and guarantee

The skilled technician and the operator shall scrupulously comply with the precautions and installation
instructions indicated in the manuals. They must:
- always work within the operating limits of the equipment.
- always carry out constant and careful maintenance through a skilled technician who complies with all
the procedures indicated in the installation and maintenance manual.
The Manufacturer declines all indirect or direct responsibility arising from:
- assembly and cabling made by personnel not fully qualified according to national standards to work on
equipment presenting electrical hazards.
- assembly and cabling made without using safety equipment and tools required by national safety
standards.
- failure to observe the installation and maintenance instructions and use of the equipment which differs
from the specifications in the manuals.
- use by personnel who have not read and thoroughly understood the content of the user manual.
- use that does not comply with the specific standards used in the country where the equipment is
installed.
- modifications made to the equipment, software, functioning logic unless they have been authorized by
the Manufacturer in writing.
- repairs that have not been authorized by the LEGRAND Technical Support Service.
- damage caused intentionally, through negligence, by acts of God, natural phenomena, fire or liquid
infiltration.
- damage caused using batteries and protections not specified in the manual.
- accidents caused by a wrong assembly of the safety protections or due to the lack of application of the
safety labels.
The transfer of the equipment to others also requires handing over all the manuals. Failure to do it will
automatically nullify any right of the buyer, including the terms of the guarantee where applicable.
If the equipment is sold to a third party in a country where a different language is spoken, the original
owner shall be responsible for providing a faithful translation of this manual in the language of the country
where the equipment will be used.

1.2.1 Guarantee terms

The guarantee terms may vary depending on the country where the UPS is sold. Check the validity and
duration with LEGRAND's local sale representative.
If there should be a fault in the product, contact the LEGRAND Technical Support Service which will
provide all the instructions on what to do.
Do not send anything back without LEGRAND's prior authorization.
The guarantee becomes void if the UPS has not been brought into service by a properly trained skilled
technician (see paragraph 2.2.1).
If during the guarantee period the UPS does not conform to the characteristics and performance laid
down in this manual, LEGRAND at its discretion will repair or replace the UPS and relative parts.
4