Cleaning And Care - Beem Tea-Switch Mode D'emploi

EN
ideal for white tea
70°C
ideal for oolong tea, green tea, inhalation solutions
80°C
ideal for fruit tea, pour-over coffee, French press, hot-water bottle
90°C
ideal for black tea, herbal tea / boiling water
100°C
These specifications are merely guides – ALWAYS follow the manufacturer's specifications
and for example with baby food or milk powder carefully check beforehand whether the
temperature is really suitable.

Cleaning and Care

NOTICES
• Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to
clean the device. These may damage the surface.
1. Empty the device completely.
2. Wipe down the kettle (8) and the base station (5) with a damp cloth. If necessary, use a
little mild detergent to remove more intense soiling.
3. Take out the limescale filter (9) inside the kettle by pressing down the locking lug and clean
it.
4. Keep the kettle and the base station ready to operate.
Descaling
Limescale deposits have an adverse effect not only on the quality of the water, but they also
cause power losses and shorten the lifespan of the device. The thicker a limescale layer is, the
more difficult it is to remove.
We therefore recommend regularly removing limescale deposits with a descaling agent in
accordance with the water quality and how often the device is used (approx. every 2 – 6
weeks).
The first indications that descaling is required are a large amount of steam being produced
and slower boiling of the water. Limescale deposits on the bottom of the kettle can cause the
device to switch off prematurely.
For descaling we recommend the BEEM Premium Descaler Concentrate. The efficient, food-safe
and environmentally friendly BEEM Premium Descaler Concentrate is available from selected
specialist stockists, via our website www.beem.de or from our customer service department on
request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the kettle (8) with a concentrate/water solution of no more than 1:20 (one part concen-
trate to 20 parts water).
Do not fill the kettle all the way up to the MAX marking to prevent any splashing or
overflow if the descaling agent causes foaming of the water.
22