Set The User Profile By Remote Control; Energy And Water Efficiency; Energy Saving Mode (Seat Heating); Holiday Mode - Duravit Sensowash I Notice D'utilisation

5.3

Set the user profile by remote control

Personal preferences can be stored in various user profiles.
> Activate the Rearwash/Frontwash.
> Set the spray wand position, water spray intensity and water temperature while
the function is active.
The LEDs on the remote control indicate the settings.
> Press the user profile for 3 seconds to save the profile.
TIP The seat has a sensor. Shower and drying functions can only be activated
when a user is sitting on the toilet.
5.4

Energy and water efficiency

To minimize the consumption of natural resources, the product has an instant
heating system and an auto-stop function for all shower and drying functions. The
following settings can be adjusted to save energy in daily use:

5.4.1 Energy saving mode (seat heating)

Deactivates the seat heating for a specified period of time, e. g. during daytime,
while at work. The seat heating is then reactivated.
> Activate energy saving mode via the app. [}App] Menu – Settings – Seat

5.4.2 Holiday mode

If the product is not to be used for two weeks or more, empty the product and
switch it off.
> Close the stop valve to interrupt the water supply.
> Activate holiday mode via the app. [}App] Menu – Care – Holiday mode
The water tank is drained. The app confirms when the procedure is completed.
> Disconnect the power supply.
> Remove the batteries from the remote control.
28