DURAVIT SensoWash i Notice D'utilisation page 37

Problem
The seat tempera-
ture is too low.
Warm air dryer
The warm air dryer
temperature is too
high/low.
The warm air dryer
level is too high/low.
**
The warm air dryer
stops automatically.
Night light
The night light does
not work.
Potential cause
The product is in energy
saving mode (LED
display lights up orange).
The product automati-
cally activate energy
saving mode if all func-
tions have been inactive
for more than 48 hours.
The temperature is set
incorrectly.
The level is set
incorrectly.
The function stops auto-
matically after 5 minutes.
The seat sensor has lost
contact.
The function is
deactivated.
Auto mode is activated.
The function automati-
cally deactivates the
night light when the
ambient light is bright.
Solution
> Deactivate energy saving
mode.
[}App] Settings – Seat
> Select any function to
reactivate the product.
> Set the temperature.
[}App] Home – Warm air
dryer
> Set the level.
[}App] Home - Warm air
dryer
Normal condition
> Sit down again.
> Activate the function.
> Activate the night light or
auto mode.
[}App] Settings – Light and
sound
Normal condition
37