Getting To Know Your Appliance; Switching The Appliance On; Operating Tips - CONSTRUCTA CK64 Série Mode D'emploi

m
Warning
Risk of electric shock
If the length of the mains cable is
inadequate, never use multiple sockets
or extension leads. Instead, please
contact Customer Service for
alternatives.
The appliance complies with protection
class I. Connect the appliance to
220–240 V/50 Hz alternating current via
a correctly installed socket with
protective conductor. The socket must
be protected by a 10 A to 16 A fuse.
For appliances operated in non-
European countries, check whether the
indicated voltage and current type match
the values of your electricity supply. This
information can be found on the rating
plate, Fig. -.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. !
A Freezer section
B Refrigerator compartment
1 Light switch
2 Temperature controller/light
3 Glass shelf in the refrigerator
compartment
4 Pull-out container
5 Vegetable container
6 Ventilation opening
7 Shelf for butter and cheese
8 Egg rack
9 Shelf for large bottles
Switching the
appliance on
Turn temperature controller, Fig. "/A,
from position "0". The appliance begins
to cool. Light is switched on when
the door is open.

Operating tips

The refrigerator compartment
temperature rises:
if the appliance door is opened
■
frequently,
if large quantities of food are placed in
■
the refrigerator compartment,
if the ambient temperature is high.
■
en
25