Getting To Know Your Appliance; Switching The Appliance On - CONSTRUCTA CK129 Série Mode D'emploi

m
Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used
for photovoltaic systems which
are connected directly to the national
grid. Sine-controlled inverters must be
used for isolated applications (e.g. on
ships or in mountain lodges) which are
not connected directly to the national
grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. !
1–4 Controls
5 Light (LED)
6 Glass shelf
7 Condensation outlet
8 Vegetable container
9 Height-adjustable feet
10 Door shelf
11 Egg rack
12 Shelf for large bottles
Controls
Fig. "
1
On/Off button
Serves to switch the appliance on
and off.
2
Temperature display
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
3
"super" display
Illuminates, if the super cooling is
in operation.
4
Temperature selection button
Press this button to set the
temperature.
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
The temperature display 2 indicates the
set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
en
23