Adjusting The Color Balance; Adjusting The Color Balance - Sony UP-50 Mode D'emploi

Setting Up the Printer (Continued)

Adjusting the Color Balance

POWER
98
Installation and Adjustment
You should use the ink ribbon and paper that are contained in the same package as
a pair. The color balance may differ depending on each pair.
It is recommended that you adjust the color balance each time you load a new ink
ribbon and paper.
Before adjusting the color balance
Reset all items in the COLOR ADJUST menu to defaults. (See "Adjusting the
Printout Color" on page 86.)
6
1
MEMORY SOURCE/ CAPTURE PRINT
PAGE MEMORY
ALARM PRINT
1
Display the source image on the video monitor by using the SOURCE/
MEMORY button.
2
Press the MENU button, then select PRN by pressing the G or g button.
The PRINTER SETUP menu appears on the source image.
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
PRN SPEED : / HIGH
MOTION CHK : OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
Switch PRN to green by pressing
the G or g button.
3,5,7,10
2,11
5
5,7,10
P R I NT ER S E T UP
/ c / l / PRN / i / o /
Display PRN in capital letters
S
by pressing the G or g button.
8
4