Sony UP-50 Mode D'emploi page 89

When adjusting DARK/LIGHT (contrast)
Adjustment item When you want to
DARK Adjust the dark area of an image.
LIGHT Adjust the light area of an image.
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3 TEMP
CYN – RED : 0
MAG – GRN : 0
YEL – BLU : 0
DARK : 0
LIGHT : 0
SHARPNESS : 8
: OFF / ON
INTERPOL.
SAVE COLOR : 1 / 2 / 3 [EXEC]
Q1 A 1 S
The contrast in the dark area or light area is increased in the + direction
by pressing the g button.
The contrast in the dark area or light area is weakened in the – direction
by pressing the G button.
When adjusting the sharpness
SHARPNESS
You can set the sharpness to any of 15 steps from 1 to 15. A setting of step 8
corresponds to the standard sharpness (default setting).
When you want to Content of settings
Make a soft outline. To the left (toward step 1)
Make a normal outline. Centered (step 8)
Make a sharp outline. To the right (toward step 15)
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3 TEMP
CYN – RED : 0
MAG – GRN : 0
YEL – BLU : 0
DARK : 0
LIGHT : 0
SHARPNESS : 8
INTERPOL. : OFF / ON
SAVE COLOR : 1 / 2 / 3 [EXEC]
Q1 A 1 S
The number and the corresponding sharpness increase every
time you press the g button.
The number and the corresponding sharpness decrease
every time you press the G button.
:
DARK
L I GHT :
SHARPNE SS :
Continue to the next page c
Installation and Adjustment
0
0
8
89