Making Full-Size Image Printouts - Sony UP-50 Mode D'emploi

Making Full-Size Image Printouts

1
SOURCE/MEMORY button
POWER
This section explains how to make a full-size image printout. The operations
described here constitute the basic procedure for making a printout.
Before making a full-size image printout
• All connections should have already been made. (See page 74.)
• Ensure that the appropriate ink ribbon/paper set is being used and that they are
correctly loaded. (See pages 9, 12 and 124.)
• Select the input signal to be used to make a printout. (See page 14.)
• Set the printer to capture one full-size image into memory. (See page 36.)
• Select the appropriate memory page. (See page 38.)
• Confirm the printout color quality (using, for example, the LOAD COLOR
number) (See page 86.)
3
4
MEMORY SOURCE/ CAPTURE PRINT
PAGE MEMORY
ALARM PRINT
1
Turn on the video monitor and the printer.
2
Start the video source to display the source image on the video monitor.
This operation is done using the controls of the video equipment acting as the
source.
Video monitor screen
Q1 A 1
RIBBON REMAIN button
DISPLAY button
Printer window display
Q1 A
S
Shows that the image from the source equipment
is displayed on the screen.
Continue to the next page c
MEMORY FRM/FLD button
1 S
17
Operation