Setting The Baud Rate For Computer Communication - Sony UP-50 Mode D'emploi

4
5

Setting the Baud Rate for Computer Communication

When controlling the printer with a computer connected to the printer's RS-232C
connector, select the appropriate baud rate. For details, contact your nearest Sony
dealer.
1
2
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CONTR : 7
BAUDRATE : / 24 / 48 / 9600
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1 S
Switch the desired operation to
green by pressing the G or g button.
Select PRN SETUP by pressing the F or f button, then press the g button.
The adjusted values are stored. The PRINTER SETUP menu appears.
Press the MENU button.
The regular screen appears.
Display the SYSTEM SETUP menu.
To display the SYSTEM SETUP menu, see steps 1 to 3 in "Adjusting the
Brightness of the Printer Window Display" on page 110.
Select BAUD RATE by pressing the F or f button.
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CONTR : 7
BAUDRATE : / 24 / 48 / 9600
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1 S
Position the cursor at BAUD RATE by
pressing the F or f button.
B E E P
Display the desired operation in
capital letters by pressing the G
or g button.
2,4
5
4
3
B AUDRA T E
1 2 / 2 4 / 4 8 /
Display BAUD RATE by
pressing the F or f button.
Continue to the next page c
Installation and Adjustment
:
o n / OF F
:
9 6 0 0
113