Sony UP-50 Mode D'emploi page 111

3
Press the g button.
The SYSTEM SETUP menu appears.
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CONTR : 7
BAUDRATE : / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1
4
Select LCD-CNTR by pressing the F or f button.
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CNTR : 7
BAUDRATE : / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1
Position the cursor at LCD-CNTR
by pressing the F or f button.
5
Adjust the brightness of the printer window display by pressing the G or g
button.
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CNTR : 5
BAUDRATE : / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1
The number increases and the contrast increases every
time the g button is pressed.
The number decreases and the contrast decreases every
time the G button is pressed.
Note
If you select the left end scale, OFF is displayed. In this case, no messages
appears in the printer window display when the video monitor returns to the
regular screen.
6
Select PRN SETUP by pressing the F or f button, then press the g button.
The adjusted values are stored. The PRINTER SETUP menu appears.
7
Press the MENU button.
The regular screen appears.
Y S T EM
S
PRN
S
L CD - CN T
Display LCD-CNTR by pressing
S
the F or f button.
L CD - CN T
S
S E T UP
[ > ]
SE T UP
R : 7
R : 5
Installation and Adjustment
111