Stopping The Engine; High Altitude Operation - Ridgid Rd9C7000Ag Manuel De L'opérateur

OPERATION

STOPPING THE ENGINE

See Figure 22.
To stop the engine under normal operating conditions:
 Remove any load from the generator.
 Turn the fuel valve to the OFF position.
 To stop the engine, place the engine switch in the OFF
position on the removable control panel or press and hold
the engine switch on the stationary control panel.
NOTE: If it is necessary to shut the engine off immediately,
either off switch may be used if the removable control panel
is connected to the unit.
WARNING:
While operating and storing, keep at least 3 feet
of clearance on all sides of this product, including
overhead. Allow a minimum of 30 minutes of "cool
down" time before storage. Heat created by muffler
and exhaust gases could be hot enough to cause
serious burns and/or ignite combustible objects.

HIGH ALTITUDE OPERATION

Specific modifications are needed for high-altitude operation.
Please contact your authorized service center for important
information regarding these modifications. Operating this
engine without the proper altitude modification may increase
the engine's emissions and decrease fuel economy and
performance.
16 — English