Publicité
7. Setting up the head parameters
NB: the softener head is preset in the factory, refer to the set up document.
Head key functions:
IMPORTANT : If no key is pressed for a few minutes, the screen is disabled. To reactivate the screen,
press the
and
key together for 5 seconds.
1 - CLOCK SETTING (to set up upon installation) :
> Press
to access the menu
> Use the
and
> Press
to access the menu
> Set the time using the
> Press
to confirm
> Press
to quit the menu
2 - RECHARGE TIME SETTING (factory preset):
NB : By default, the recharge time is set to 2 am (time at which there is no water consumption)
However, the recharge time can be changed as follows:
> Press
to access the menu
> Use the
and
> Press
to access the menu
> Use the
and
> Press
to access the menu
Enter key: press to confirm.
Esc key: press to go back
Up and Down arrows: to browse through the water
softener menus.
keys to select «Set Clock»
and
keys
keys to select «Advanced Settings»
keys to select «Set Recharge Time»
31
Publicité
