Publicité
IMPORTANT : Take great care not to reverse the Inlet and Outlet on the water softener. An arrow,
indicating the water Inlet, is marked on the case (on the right).
NB: Choose fittings according to the pipe used (diameter and material).
The inlet and outlet diameters of the softener are in Male 3/4» (20x27).
Screw the hoses without excessive tightening on the by-pass using nitrile rubber seals and ensure
tightness.
6. Electrical connection
REMINDER : Connect through a standard electrical supply socket.
> 1. Plug the cable connector into the connector on the head (on the rear of the water softener
head).
> 2. Plug the transformer connector into a standard 230-240 V/50 Hz mains power socket (not
supplied).
30
OUTLET
INLET
Adoucisseur Priméo 18 L - 6997865 - ABRI820246 - 2022/10- Ind C
Publicité
