Reset To Factory Settings; Faq - Agv Insyde Mode D'emploi

2. While in standby mode,
3. When the LED flashes red, press
→ The LED flashes purple 5 times slowly, confirming that pairing has been reset.

5.3 RESET TO FACTORY SETTINGS

This option deletes all paired units and devices.
To reset the factory settings:
1. Check that your INSYDE is in Standby (see INSYDE LED Indications).
2. Simultaneously press

5.4 FAQ

Additional answers to common problems can be found at:
https://www.cardosystems.com/support/
press for 5".
5"
and for 2".
+ + for 5".
27
2"
5"