AGV INSYDE Mode D'emploi page 59

To pair a non-Cardo Bluetooth
1. Confirm your unit is in Standby Bluetooth
If your unit is not in Bluetooth
x1
For more information, see Switching between Intercom modes.
2. To initiate 2-way pairing:
• On your unit, press
5"
→ The LED flashes red.
• Tap
→ The LED flashs red and blue.
Bluetooth
• The unit confirms that pairing has succeeded.
Rider 1
intercom group unit:
®
intercom mode, tap
®
for 5".
to activate the Cardo getaway.
x1
intercom pairing needs to be initiated on the other device.
®
You
intercom mode (LED flashes blue slowly).
®
and
22
.