Bluetooth Intercom - Agv Insyde Mode D'emploi

4.2 BLUETOOTH
To connect your unit to another unit with a Bluetooth
or other Bluetooth
®
automatically recognize each other whenever they are in range (line of sight up to 1.3 km subject
to terrain).
Pairing a channel replaces any existing paired unit on that channel with the new unit.
The Intercom range with other models is limited to the distance of the unit with the
shorter range. For details on how to pair and use your INSYDE with other Cardo
units, go to Setting Up Non-DMC Intercom Groups.
4.2.1 SETTING UP NON-DMC INTERCOM GROUPS
DMC is always the best way to connect a group of riders. If you happen to ride with a group of
riders that do not have DMC devices (such as Bluetooth
brands), you can switch your unit to Bluetooth
participating riders are connected in a chain with a maximum total of four riders.
To set up a Cardo non-DMC group:
1. Confirm your unit is in Standby Bluetooth
If your unit is not in Bluetooth
x1
For more information, see Switching between Intercom modes.
2. To initiate 2-way pairing:
• On your unit, press
another user.
Bluetooth
• The unit confirms that pairing has succeeded.
Rider 1
→ The following announcement is heard: Rider A pairing.
INTERCOM
®
enabled devices, you must first pair their channels. Once paired, the units
intercom mode, tap
®
for 5"
5"
intercom pairing needs to be initiated on the other device.
®
You
intercom, such as a Cardo Bluetooth
®
communicators by Cardo or by other
®
mode and create or join a non-DMC group. The
®
intercom mode (LED flashes blue slowly).
®
and
to enter pairing mode with the device of
20
.
unit
®