AGV INSYDE Mode D'emploi page 45

To pair Bluetooth channel 1 to a mobile phone:
®
1. Enable Bluetooth
2. On the unit, press
5"
→ The LED flashes red and blue.
3. On your mobile phone, search for Bluetooth
4. When your INSYDE appears in the list of available devices, select it.
5. If prompted for a PIN or Passkey, enter 0000 (four zeros).
→ The phone confirms that pairing has succeeded and the LED flashes purple for 2".
To pair Bluetooth channel 2 to another Bluetooth
®
1. Enable Bluetooth
player).
2. Press for 5".
5"
→ The LED flashes red and blue.
3. Tap twice.
x2
→ The LED flashes red and green.
4. If you are pairing a GPS device, tap
x1
→ The LED flashes slower.
5. On the device you are pairing, search for Bluetooth
6. When your INSYDE appears in the list of available devices, select it. If prompted for a PIN
or Passkey, enter 0000 (four zeros).
→ The device confirms that pairing has succeeded and the LED flashes purple for 2 sec-
onds.
on the mobile phone.
®
for 5".
on the device (for example, your mobile phone, GPS device, or music
®
devices.
®
device:
®
.
devices.
®
8