Using The Bluetooth - Agv Insyde Mode D'emploi

4.2.2 USING THE BLUETOOTH

4.2.2.1 Starting / Ending Bluetooth
To start or end communication with Rider 1:
• Rider 1: tap .
To start or end communication with Rider 2:
• Rider 2: tap twice.
To initiate a 4-way Bluetooth
Rider 1 You
Connect
to rider 1
x1
Connects
to rider 2
x2
4.2.2.2 Receiving Bluetooth
If another paired unit calls you via Bluetooth
4.2.3 USING THE BLUETOOTH
Resetting Bluetooth
®
To reset Bluetooth intercom pairing:
®
1. Press for 5".
2. When the LED flashes red, press
→ The LED flashes purple five times slowly, confirming that pairing has been reset.
x1
x2
conference:
®
Rider 2 Rider 3
Connects
to rider 3
x1
You can also start the Bluetooth intercom by making a loud
noise, for example, by saying "Hey." If channels A and B are
already paired, the conversation starts for both of them.
intercom calls
®
intercom pairing also resets all Bluetooth
5"
and
INTERCOM
®
intercom calls
®
intercom and in standby, the call begins instantly.
®
INTERCOM
®
for 2".
2"
24
device pairing.
®