AGV INSYDE Mode D'emploi page 55

4.1.1.3 Deleting DMC intercom groups:
If you delete a DMC intercom group, you must rejoin it if you want to connect to it again in
the future.
To delete a DMC group:
1. Confirm your INSYDE is in DMC intercom mode (LED flashes green slowly): if your INSYDE is
not in DMC intercom mode, tap
x1
2. Press for 5".
5"
3. Press for 2".
x2
4.1.2 SETTING UP DMC INTERCOM GROUPS
4.1.2.1 Joining DMC intercom groups
You can use the DMC bridging feature to add a non-DMC rider or passenger to the intercom group.
To bridge a non-DMC passenger/rider:
1. Verify that the passenger/rider is paired via Bluetooth
Groups).
2. On your unit, press
x1
To disconnect the bridge:
• Press .
and .
.
18
(see Setting Up Non-DMC Intercom
®