UltraSecure ULTRACOM 3 Mode D'emploi page 15

By default, the aerial mode is set to INTERNAL.
Frequency
The FREQUENCY menu is reserved for our technical teams. Change the
frequency of the UltraCOM3 caller station only if specifically requested.
Unlock Pin
The unlock pin is used to activate the caller station
relay in order to open the wired element (gate, latch...
see page 19). If you wish to change the unlock
pin, unlock the caller station (see page 11), scroll
through the menus using the button
the UNLOCK PIN menu by pressing the button
You can then enter a 5-digit pin using the keypad. Then press the button
validate your unlock pin.
By default, no unlock pin is entered in the caller station.
Menu pin
The menu pin allows you to unlock the caller station
and access the menu. It is configured during the
first commissioning of your UltraCOM3 (see page
10). If you wish to change the menu pin, unlock
the caller station (see page 11), scroll through the
menus using the button
menu using the button
Then press the button
Remember your menu pin, it is essential to unlock the caller station. If you
forget this pin, a full reset will be required (see page 17).
The menu pin must be different from 00000000.
ULTRA SECURE
and enter
and enter the MENU PIN
. You can then enter a new 8-digit pin using the keypad.
to validate your pin.
15
UNLOCK PIN: UNLOCK PIN:
_ _ _ _ _ _ _ _ _ _
OK OK EXIT EXIT
.
MENU PIN MENU PIN
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
OK OK EXIT EXIT
ultrasecuredirect.com
to