UltraSecure ULTRACOM 3 Mode D'emploi page 12

When all the handsets are in pairing mode, confirm
the pairing on the caller station by pressing the
button
. A confirmation beep and the message PAIRING
OK will confirm the pairing. You can then return to
the Residents menu by pressing the button
the handset(s), hold down the key
and validate the pairing.
Important: pairing a handset to an resident erases all the handsets already
paired to this same resident. If you wish to pair several handsets for the
same resident, you must therefore pair all the handsets at the same time.
Important: the same handset cannot be paired to several residents. If a
handset paired to resident X is paired to resident Y, then that handset will
no longer be paired to resident X.
• Delete resident data: Navigate using the button
and enter the DELETE menu using the button
. The caller station asks you to confirm the deletion
of data from this resident. Confirm sing the button
or cancel using the button.
Important: by performing this operation, you delete all the data relating to
the resident concerned: name of the resident and pairing associated with
this resident. However, the location remains available and can still be used.
External volume
You can adjust the volume of the sound emitted by the caller station during a
conversation. To do this, unlock the caller station (see page 11), scroll through
the menus using the button
. Then choose the desired volume level from 1 to 5 using the button
your choice by pressing the button
By default, the external volume level is set to 3.
ULTRA SECURE
. On
to reboot
and enter the OUT. VOLUME menu using the button
.
12
PAIRING '1': PAIRING '1':
PAIRING OK PAIRING OK
RESIDENTS RESIDENTS
1:NAME 1:NAME
DELETE DELETE
OK OK BACK BACK
ultrasecuredirect.com
. Confirm