Publicité
Les langues disponibles
Les langues disponibles
Outdoor tone
The outdoor tone sounds when a visitor rings the intercom. You have the option of
activating the outdoor tone or not. To do this, unlock the caller station (see page 11),
scroll through the menus using the button
using the button
your choice by pressing the button
By default, the outdoor tone is set to YES.
Relay time
The opening time corresponds to the activation time
of the NO/NC relay on the caller station i.e. the time
during which the wired element (gate, latch, etc.) will
be open. This duration can be set from 0 to 99
seconds. To do this, unlock the caller station (see
page 11), scroll through the menus using the
button
and enter the RELAY DURATION menu using the button
the desired duration from 0 to 99 using the keypad. Confirm your choice by pressing
the button
.
Important: if you set the relay opening time to 0, opening the relay using the
opening code and the handset will be impossible.
By default, the relay opening time is set to 1 second.
Switching on the screen (Wake Method)
The caller station screen can be switched on in 4 different ways:
•
Screen always on (ALWAYS. ON) : the screen remains on 24 hours a day. This
mode requires double confirmation because it reduces the panel's battery life.
•
Strong motion detection (PROX HIGH): the screen turns on when it detects
movement at a distance of approximately 5 meters.
•
Weak motion detection (PROX LOW): the screen turns on when it detects
movement at a distance of approximately 2.5 meters.
•
Pressing a button (ANY BUTTON): the screen turns on only when a button on
the keypad is pressed. Motion detection is nevertheless necessary to turn on the
screen in addition to pressing a button.
ULTRA SECURE
. Then choose between YES and NO using the button
.
and enter the OUTDOOR TONE menu
RELAY TIME:
RELAY TIME:
OK
OK
13
. Confirm
1 S
1 S
EXIT
EXIT
. Then choose
ultrasecuredirect.com
Publicité
