Publicité
Les langues disponibles
Les langues disponibles
UltraCOM3 commissioning
When starting up the UltraCOM3 for the first time,
the caller station will ask you to choose the language
of the menu (French or English). To choose, scroll
using the button
the button
.
You will then need to choose an 8-digit menu pin.
This pin will allow you to access the caller station
menu in order to configure the settings and pair the
handsets. It must be different from 00000000.
Confirm your pin by pressing the button
After initialisation, the caller station will display the
"NO RESIDENTS" screen. Then enter the menu by
pressing the button
confirm by pressing the button
You then access the menu. Attention! Without any
action on your part, the caller station will display the "No RESIDENTS" screen
again after 40 seconds. Find all the information about each menu in the rest of the
user guide.
If no handset is paired when the UltraCOM3 is first powered up, the caller
station will continue to display the "NO RESIDENTS" screen. It will turn
off after 15 seconds and will turn on when passing in front of the motion
detector located above the screen. (If PROX selected in wake up)
ULTRA SECURE
and then confirm by pressing
, enter your menu pin, then
again.
BY ULTRASECURE
BY ULTRASECURE
FRENCH
FRENCH
SET MENU PIN
SET MENU PIN
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
OK
OK
.
NONE
NONE
NO RESIDENTS
NO RESIDENTS
OPEN MENU
OPEN MENU
10
OK
OK
BACK
BACK
ultrasecuredirect.com
Publicité
