Publicité
Les langues disponibles
Les langues disponibles
UltraCOM3 settings
In order to access the various menu settings, you will need to unlock the caller
station. To do this, if you are using the UltraCOM3 for the first time, follow the
UltraCOM3 commissioning procedure, described on previous page. If your caller
station already in place, follow the unlocking procedure below.
Unlocking the caller station
To enter your UltraCOM3 menu, press
7 seconds. Then enter your menu pin and validate using the button
station will then be unlocked, allowing you to navigate the menu using the button
.
Residents (pairing of handsets)
The UltraCOM3 allows you to pair an unlimited number of handsets on 9 different
residents.
When you enter the Residents menu (using the button
the 9 UltraCOM3 residents. You can scroll through these residents using the button
. To change the name of an resident, pair handset(s) or delete data from a
resident, select it using the button
•
Rename the resident: Enter the RENAME
menu. Using the button
your choice (within the limit of the available space)
using the keypad on the caller station (if necessary,
find our advice on using the keypad see page
25). Do not forget to save the name by validating
using the button
on your part, the caller station will lock after 40
seconds.
•
Pairing handsets: To pair the handset(s),
place it close to the caller station (1 meter
maximum). Navigate using the button
the PAIRING menu using the button
will then show the message HANDSETS 'P'.
This means that you must activate the Pairing
mode of the handset(s) to be paired with this
resident. To do this, switch off the handset(s)
concerned by holding down the key
it back on by simultaneously holding down the
keys
and
that the Pairing mode of the handset(s) is enabled.
ULTRA SECURE
. Then follow the next steps.
. Then type the name of
. Without action or validation
. The flashing light
and
buttons simultaneously for
), you will reach the list of
1: 1:
EDIT NAME
EDIT NAME
OK
OK
1:NAME
1:NAME
PAIRING
PAIRING
and enter
. The screen
OK
OK
PAIRING '1':
PAIRING '1':
HANDSETS 'P'
HANDSETS 'P'
and switch
PAIR
PAIR
indicates
11
. The caller
BACK
BACK
BACK
BACK
BACK
BACK
ultrasecuredirect.com
Publicité
