BIANCHI VENDING HL/5010 Série Manuel D'emploi Et D'entretien page 12

ENGLISH
BEFORE USING THE MACHINE, READ THIS MANUAL CAREFULLY FOR ITS CORRECT USE IN ACCORDANCE WITH THE CURRENT SAFETY STANDARDS.
ATTENTION: Important safety
indications
READ the instruction manual
machine carefully before using
the machine
IMPORTANT NOTICES
MAINTENANCE TECHNICIAN
The maintenance technician is defined as being the person responsible for filling up the containers with soluble products, sugar, coffee, stirrers
and cups. The maintenance technician is also responsible for cleaning the distributor (see operations indicated in chapter 6.0). In the event of a
fault the maintenance technician must call the installation technician.
INSTALLATION TECHNICIAN
The installation technician is defined as the person responsible for the installation of the automatic distributor, the starting up operations and the
function settings. Each regulation operation is the exclusive responsibility of the installation technician who also holds the programming access
password.
Keys at the disposal of
the MAINTENANCE and
INSTALLATION technicians
N° 1 Key
1.0 PREMISE
I - Important notices for operator
This automatic distributor has been designed and constructed in full accor-
dance with current safety regulations and is therefore safe for those who
follow the ordinary filling and cleaning instructions as indicated in this manual.
The user must not under any circumstances remove the guards that
require a tool for removal.
Some maintenance operations (to be done solely by specialized technicians
and indicated in this manual with a special symbol) require that specific
safety protections of the machine must be switched off .
In accordance with the current safety regulations, certain operations are
the exclusive responsibility of the installation technician, and the ordinary
maintenance technician may have access to specific operations on with
specific authorization.
The acquaintance and absolute respect, from a technical point of view, of
the safety instructions and of the danger notices contained in this manual,
are fundamental for the execution, in conditions of minimum risk, for the
installation, use and maintenance of this machine.
II - General Instructions
Knowledge of the
in the present manual is essential for a correct use of the
automatic vending machine on the part of the user .
– Interventions by the user on the automatic vending machine are allowed
only if they are of his competence and if he has been duly trained.
The installation technician must be fully acquainted with all the mecha-
nisms necessary for the correct operation of the machine.
– It is the buyer's responsibility to ascertain that the users have been
trained and are informed and regulations indicated in the technical do-
cumentation supplied.
Despite the full observance of the safety regulations by the constructor,
those who operate on the automatic dispensers must be fully aware of
the potential risks involved in operations on the machine.
Tools necessary for undertaking interventions on the automatic dispenser.
SOCKET SPANNERS
n° 5,5 - n° 7 - n° 8 - n° 10 - n° 20 - n° 22
SPANNERS (fork type)
n° 7 - n° 8 - n° 10 - n° 12 - n° 14
INDEX
1.0 PREMISE
2.0 TECHNICAL CHARACTERISTICS
3.0 MOVING AN AUTOMATIC VENDING MACHINE
4.0 INSTALLATION
5.0 SOFTWARE INSTRUCTIONS
6.0 MAINTENANCE AND INACTIVITY
7.0 ACCESSORIES
information and instructions contained
For any service or maintenance
switch off the machine
ATTENTION:
machine switched on
SCREWDRIVERS
Small size
Medium size
Large size
Normal cross
Small cross
Medium cross
Large cross
Of Teflon, small size for Trimmer regulation
– This manual is an integral part of the equipment and as such must always
remain inside of the same, so as to allow further consultations on the
part of the various operators, until the dismantlement and/or scrapping
of the machine.
– In case of loss or damage of the present manual it is possible receive a
new copy making application to the manufacturer, with prior indication
of the data registered on machines' serial number.
– The functional reliability and
guaranteed only if original parts are used.
– Modifications to the machine not previously agreed on with the construction
company and undertaken by the installation technician and/or manager,
are considered to be under his entire responsibility.
All the operations necessary to maintain the machine's efficiency, before
and during it's use are at the users charge.
– Any manipulations or modifications made to the machine that are not
previously authorized by the manufacturer, relieve the latter from any
responsibility for damages deriving from, and will automatically result
in the cancellation of the machine guarantee terms.
– This manual reflects the status at the moment of the emission of the
automatic vending machine on the market; possible modifications, upgra-
ding, adaptments that are done the machine and that are subsequently
commercialized do not oblige BIANCHI VENDING GROUP Spa neither
to intervene on the machine previously supplied, nor, neither to update the
relative technical documentation supplied together with the machine.
– It is however BIANCHI VENDING's Group faculty, when deemed op-
portune and for valid motives, to adjourn the manuals already present
on the market, sending to their customers adjournment sheets that must
be kept in the original manual.
Possible technical problems that could occur are easily resolvable consulting
this manual ; For further information, contact the distributor from whom
the machine has been purchased, or contact Bianchi Vending's Technical
Service at the following numbers:
 +039. 035.45.02.111 - fax +039. 035.883.304
12
ATTENTION: hot parts in contact!
CAUTION! Parts in motion
PE
Earthing indication
RATCHET SPANNER no.14
TESTER
ELECTRICIAN'S SCISSORS
PROGRAMMING KIT
optimization of machine's services are