Drawer Removal - GE 26 Manuel D'utilisation Et D'installation

About the freezer.
10
Freezer Basket and Drawer
Basket.
Drawer.
Basket Removal
To remove:
Remove Freezer Bin. (See below.)
Pull basket out to the stop position.
Tilt up the rear of the bin.
Lift it out to remove.
Basket Divider Removal
To remove:
Pull basket out to the stop position.
Tilt up the rear of the bin.
Lift it out to remove.

Drawer Removal

To remove:
Pull the drawer out to the stop position.
Remove both side knobs with a flat-head
screwdriver (as shown at left).
Tilt up the rear of the drawer and lift
drawer up and out.
Non-Adjustable Bin in the Freezer
To remove: Pull the brackets upward until
you hear a clicking sound and remove
the bin.
To replace: Hook the ends of the bin into
both brackets and push down until the bin
locks into place.
To replace:
Place the basket into the rail assembly.
To replace:
Hook the top corners of the divider over
the hole of the basket.
To replace:
Pull both rails out to the stop position.
Place the drawer onto the rails and hook
the support into the slots located on
the side of the drawer.
Replace the side knobs and push
the drawer back into place.
WARNING:
Do not lose the side
knobs during disassembly since they may
present a choking hazard to children.