Setting The Language; Setting The Water Hardness - Saeco Talea Touch Plus Ri9828/11 Mode D'emploi

InstALLAtIon
6

settInG tHe LAnGUAGe

When the machine is switched on for the fi rst time, it requires the selection of the desired language. This allows
you to adjust the parameters of the beverage to the typical parameters of the country where the machine is used.
This is why some languages are differentiated also by country.
1
1.2.1.1.1 language
italiano (it)
english
Deutsch
Italiano (ch)
Select the desired language. If
necessary, press the key to
display additional languages.
4
rinse
When the correct temperature is
reached, the machine performs a
rinse cycle of the internal circuits.

settInG tHe WAteR HARDness

the test strip can only be used for one measurement.
1
Immerse the water hardness test strip
in water for 1 second.
2
1.2.1.1.1 language
italiano (it)
english
Deutsch
Italiano (ch)
press .
5
rinse
A small quantity of water is
dispensed. Wait for this cycle to be
completed automatically. Refer to
page 23 to enable/disable the rinse
function.
Intenza Aroma System
2
A
1 2
Machine water hardness setting
Check the water hardness value and set:
- the machine water hardness level (page 23);
- the Intenza Aroma System (page 8).
3
warming up
Wait until the machine completes
the warming phase.
6
8:30 am
15/06/06
The main screen for beverage
selection appears on the display.
Set the clock and the calendar of
the machine as shown on page 25.
b c
3 4