Saeco Talea Touch Plus RI9828/11 Mode D'emploi page 33

MAIntenAnce
30
Insert the tank back onto the
machine.
10
fi ll the water tank with fresh
water
Rinse the machine's circuits by
pressing the icon.
13
Turn the knob until it is in the
rest position ( ).
16
8:30 am
15/06/06
Press the displayed icon
corresponding to the long coffee
once for 1 cup.
The machine starts brewing.
NOTE: if the water fi lter is not used, insert the small white fi lter previously removed (see step 1 - page 8) into the tank.
After performing the descaling cycle, wash the brew group as described in the "Cleaning and Maintenance" section.
11
boiler cleaning cycle
The machine performs the rinse cycle.
During the rinse cycle, the machine
may require the water tank to be fi lled.
14
8:30 am
15/06/06
When descaling is complete, return
to the main menu.
17
At the end of the procedure empty
the cup.
Repeat the procedure from step 15.
The machine is now ready.
12
fi ll water tank
Once the rinse cycle is fi nished, the
above screen appears.
Remove the water tank, install the
water fi lter again (if desired) and fi ll
it with fresh drinking water.
15
Place a cup under the dispensing
spout.