First Use - Saeco Talea Touch Plus Ri9828/11 Mode D'emploi

FIRst Use - Use AFteR A LonG PeRIoD oF InActIVItY
These operations ensure an optimum brewing and must be performed:
1) At fi rst start-up
2) When the machine remains inactive for a long time (more than 2 weeks).
1
Fill the tank with fresh drinking water.
Do not exceed the maximum level
indicated on the tank. Then place the
tank back.
4
hot water
steam
hot
water
Select the hot water dispensing.
7
To stop dispensing, turn the knob
until it reaches the off position ( ).
Empty the container and repeat the
operations from step 5 until the tank
is completely empty.
Then fi ll the tank again as described
in step (1).
2
Place a container under the hot
water wand.
5
Turn the knob to the position
to start dispensing water.
8
Place a cup under the dispensing
spout.
7
3
8:30 am
15/06/06
Press the icon.
6
Dispense water until the container
is full.
9
8:30 am
15/06/06
Press the displayed icon
corresponding to the long coffee
once for 1 cup.
The machine starts brewing.
At the end of the procedure empty
the cup.
Repeat the procedure from step 8.
The machine is now ready.