Priming The Water Circuit; Saeco Adapting System - Philips Saeco XSMALL Sup 033R Mode D'emploi

• Make sure selector switch is on " "
position; if this is not the case, set it to
that position.
• To turn on the machine simply press
the ON/OFF button; the " " light will
begin to blink rapidly indicating that
the water circuit must be primed.
Note: Before starting the
machine for the first time,
prime the water circuit.

Priming the Water Circuit

• To prime the water circuit, place a
container under the steam wand
(Pannarello, if supplied).
• Turn the selector switch clockwise to set
it to the "
When water steadily comes out and the
" " light will blink slowly - indicating
that the knob can be turned off - rotate
the knob counter-clockwise to set it
back to the " " position.
• At this point the " " light begins to
blink slowly, indicating that the ma-
chine is in warm-up mode.
When warm-up is complete,
the machine performs a rinse
cycle of the internal circuits.
• When the operations described above
are complete, check that the " " light
is steady on. The machine is now ready
for use.
• To brew coff ee, dispense hot water or
steam, and for a proper use of the ma-
chine, carefully follow the instructions
Steady on
provided.
Rinse/Self-cleaning Cycle
This cycle allow rinsing the coff ee circuits
with fresh water.
The cycle is carried out:
• At machine start (with cold boiler)
• After priming the water circuit (with
cold boiler)
• During the Stand-by preparation phase
(if a coff ee product has been brewed)
• During the turning off phase after
pressing the ON/OFF button (if a coff ee
product has been brewed).
• 20 •
" position and wait.
Note: If you are attending the
operation, place a container
under the dispensing spout before
starting dispensing.
A small amount of water will be dispen-
sed which will rinse and heat all the ma-
chine components; in this phase the lights
blink cyclically in a counter-clockwise
direction.
+
Wait for the cycle to fi nish automatically.
You can stop dispensing as well, by pres-
sing either coff ee button.
Blinking
ADJUSTMENTS
The machine that you have bought allows
for certain adjustments that will permit
you to use it to its full potential.

Saeco Adapting System

Coffee is a natural product and its cha-
racteristics may change according to its
origin, blend and roast. The Saeco coff ee
machine is equipped with a self-adjusting
system that allows the use of all types of
coff ee beans available on the market (non
caramelized).
• The machine automatically adjusts
itself in order to optimise the extrac-
tion of the coffee, ensuring perfect
compression of the tablet to obtain a
creamy espresso coff ee that will release
all the aromas, regardless of the type of
coff ee used.
• The optimisation process is a learning
process that requires the brewing of a
certain number of coff ees to allow the
machine to adjust the compactness of
the ground coff ee.
• Attention should be given to spe-
cial blends, which require grinder
adjustments in order to optimise the
extraction of the coff ee (see section
"Coff ee Grinder Adjustment").