Preparing For Use; Filling The Water Tank; Filling The Coffee Bean Container; Heating Up The Machine - Philips 2000 Série Mode D'emploi

English
10

Preparing for use

Filling the water tank

Filling the coffee bean container

Heating up the machine

1 Remove the water tank from the machine.
2 Rinse the water tank under the tap.
3 Fill the water tank with cold tap water up to the MAX indication.
Warning: Never fill the water tank with warm, hot or sparkling
water, as this may cause damage to the water tank and the
machine.
4 Slide the water tank back into the machine.
1 Fill the coffee bean container with espresso beans.
Note: Only use espresso beans. Never use ground coffee,
unroasted coffee beans or caramelised coffee beans, as this may
cause damage to the machine.
2 Put the lid on the coffee bean container.
During the initial heat-up process, fresh water flows through the
internal circuit to heat up the machine.This takes a few seconds.