Philips 2000 Série Mode D'emploi page 19

English
20
1
2
4 Press the PUSH button and pull at the grip of the brew group to
remove it from the machine.
5 Clean the coffee exit duct thoroughly with a spoon handle or
another round-tipped kitchen utensil.
6 Clean the inside of the machine with a damp cloth.
7 Rinse the outside of the brew group under a lukewarm tap.
Warning: Never use any washing-up liquid or other cleaning agent
to clean the brewing unit.
Warning: Do not dry the brew group with a cloth to prevent fibers
from collecting inside the brewing unit.After rinsing, just shake
excess water off the brewing unit or let it air-dry.
8 Before you slide the brew group back into the machine, make sure
the two reference signs on the side match. If they do not match,
perform the following step:
- Make sure the lever is in contact with the base of the brew
group.
9 Make sure the locking hook of the brew group is in the correct
position.