Frothing Milk - Philips 2000 Série Mode D'emploi

Frothing milk

- Press the espresso button or regular coffee button twice to brew 2
cups of coffee.
The 2-cup light lights up.The machine grinds the required amount
of coffee beans for one cup and then fills both cups half.Then the
machine grinds coffee beans for one cup again and fills both cups
fully.
4 Press the on/off button to switch off the machine.
If you only brewed one cup of coffee, the machine briefly rinses the
inner circuit before it switches off.
Note:When the machine is left in standby mode, it switches off
automatically after 30 minutes.
If you want to froth milk after switching on the machine or after
brewing a cup of coffee, there may still be some water in the internal
circuit. You need to let this water flow out of the machine first.
1 Place a big cup under the hot water/steam wand or classic milk
frother.
2 Turn the control dial to the steam icon.
The on/off button flashes while the water heats up.
Hot water comes out of the hot water/steam wand or classic milk
frother.
3 When only steam comes out of the hot water/steam wand or
classic milk frother, turn the control dial back to the coffee bean
icon.
4 Fill a jug up to 1/3 with cold milk.
Note: Always use milk coming directly from the fridge for optimal
results. You can use whole milk or semi-skimmed milk, depending
on your preference.
English
15