Cleaning And Maintenance; Cleaning The Water Tank, The Coffee Grounds Container And The Drip Tray - Philips HD8030 Mode D'emploi

ENGLISH
16
4203_000_7242_1_DFU Booklet_Lux_A5_v2.indd 16
6 Insert the lug on the broad end of the grinding degree next to the
cap of the grinding degree adjustment hole and press lightly. This
makes the cap open automatically.
7 Insert the narrow end of the grinding degree adjustment tool into
the grinding degree adjustment hole so that the opening in the tool
button, when the device starts grinding you can adjust the grinding
degree.
8 For a coarser setting, push down and turn the grinding degree
the grinding degree adjustment tool anticlockwise.
Note: Turn the grinding degree adjustment tool one step clockwise or
anticlockwise at the time. Then brew 2 or 3 cups of coffee to establish if the
grinding degree has been adjusted to your satisfaction.
9
degree adjustment tool from the grinding degree adjustment hole,
close the cap and place the grinding degree adjustment tool back
into its recess.

Cleaning and maintenance

Never immerse the coffeemaker in water or any other liquid, nor rinse it
under the tap.
Always unplug the coffeemaker and let it cool down before you clean it.
Note: None of the detachable parts, nor the the brewing unit and the jug are
dishwasherproof, rinse them under the tap.
Cleaning the water tank, the coffee grounds container and the
drip tray
Empty and clean the water tank, the coffee grounds container and the drip
tray every day. Also empty and clean the water tank and coffee grounds
container when the 'water tank empty' light and/or the 'coffee grounds
container full' light go on. Empty and rinse the drip tray when the 'drip tray
full' indicator indicates the drip tray is full.
1 Remove the water tank from the coffeemaker.
5/29/12 5:50 PM